Robomow’s Base Station must be placed along the Perimeter Wire, where the wire “loop” starts and ends.
Other things to keep in mind when placing the Base Station:
Place it on relatively level ground. Do not place it on a slope.
Do not place it within 3 meters from a corner (1 m for RX models).
Place it close enough (within 20 m for RS models / within 15 m for RC models/ within 10 m for RX models) to a power outlet (230V / 120V).
- Put it in a shady spot. This will extend the battery lifetime.
- Make sure it is invisible from the street.