Help Center Type your question Or Choose a category
to find the help you need

Recharge battery (18)

This article is intended for Robomow professional dealers.


For RS / MS / RC / MC models

Battery voltage reached a level to stop the current automatic operation.

Possible reasons for such error may be:


Problem Cause Corrective Action
Wrong Base Station settings If the operation was done in a separate zone without Base Station installed, set Base Station option to Off.
RS/MS models: Go to  Lawn Option > Zones > Edit > Select Zone A/B >Base Station >Change to "No"
RC/MC models: Press Settings button for 3 seconds, and enter P013, press OK to confirm, and change to "Off"
Robot does not succeed to find the Base Station Click the link below for further investigation:
The robot does not enter the Base Station properly