Help Center Type your question Or Choose a category to find the help you need
This article is intended for Robomow professional dealers.
For RS / MS / RC / MC models
Mow and Drive current are significantly higher than normal.
Possible reasons for such error may be:
|Problem Cause||Corrective Action|
|High grass||Raise Mowing height CAUTION – Switch off the Safety/System Switch !|
|Lawn conditions||Check the lawn for no obsicles, or holes in the ground that eliminate the drive wheels to rotate freely.|
|Drive wheels clean from mud||Clean Drive wheels from mud|
|Severe grass accumulation under the mowing deck||Clean out accumulated grass clippings using a wooden stick.|
|Mowing motor is stuck||Inspect blades for foreign material or debris preventing rotation|
|Rope or similar object wrapped around the mowing blade||Remove foreign material preventing the mowing blade rotation|
|Internal malfinction||A further investigation required by an authorized technnitian. Call Robomow Hotline.
http://robomow.eu/ Contact us page