to find the help you need
This article is intended for Robomow professional dealers.
For RS / MS / RC / MC models
The robot returns to the Base Station after a relatively short working time due to battery voltage drop. This can happen because the battery voltage fall below 20 volts or because one of the battery cells drops below 3 volts.
|Problem Cause||Corrective Action|
|Often malfunction caused by poor contact in one of the pins of the battery cable||
Remove and insert the battery cable several times.
|Check visually that no mechanical damage and all contacts are in place and also that no signs of corrosion or contamination on pins.|
|If the problem is not solved, then it is required to replace the Battery.|