Help Center
Type your question Or Choose a category
to find the help you need
to find the help you need
Check Mow (60)
This article is intended for Robomow professional dealers.
For RS / MS models
Mowing motor has faced an over-current for too long.
CAUTION – Switch off the Safety/System Switch before checking the following.
Possible reasons for such error may be:
Problem Cause | Corrective Action |
High grass | Raise Mowing height |
Severe grass accumulation under the mowing deck | Clean out accumulated grass clippings using a wooden stick. |
Mowing motor is stuck | Inspect blades for foreign material or debris preventing rotation |
Rope or similar object wrapped around the mowing blade | Remove foreign material preventing the mowing blade rotation |