Help Center Type your question Or Choose a category
to find the help you need

How to Adjust the Cutting Height in Robomow

This article contains the following sections:

For RC / MC models

For RS / MS models

For RX models

 

For RC / MC models

Blade Cutting Range: 15 – 60 mm (0.6 – 2.4 inches)

To adjust the cutting height of the blade, do the following:

CAUTION! ALWAYS TURN THE SAFETY SWITCH OFF BEFORE ADJUSTING THE CUTTING HEIGHT!

          

  • Lift the front side of the mower
  • Turn the knob while pushing it down
  • To lower the cutting height, turn anticlockwise
  • The cutting height is displayed at the side of the mower

 

 

For RS / MS models

Blade Cutting Range: 20 – 80 mm (0.8 – 3 inches)

To adjust the cutting height of the blade, do the following:

CAUTION! ALWAYS TURN THE SAFETY SWITCH OFF BEFORE ADJUSTING THE CUTTING HEIGHT!

  • Lift the Door panel at the top of the mower
  • Turn the knob (A) while pushing it down
  • To raise the cutting height, turn Anti Clockwise
  • To lower the cutting height, turn Clockwise
  • The cutting height (B) is displayed to the left of the knob (A)

 

For RX models

To set the mowing height, press and turn the mowing height adjustment button in the desired direction.

* I is for the deepest mowing height

* IIIII is for the highest mowing height

mceclip0.png