Help Center Type your question Or Choose a category to find the help you need
This article is intended for Robomow professional dealers.
For RS / MS / RC / MC models
Front Wheel is detected for too long time during automatic operation.
|Problem Cause||Corrective Action|
|Robomow has driven onto an obstacle, raising its front end||Exclude this area from the installation setup|
|High grass||Raise Mowing height CAUTION – Switch off the Safety/System Switch !|
|Lawn conditions||Check the lawn for no obsicles, or holes in the ground that eliminate the drive wheels to rotate freely.|
|Internal malfinction||A further investigation required by an authorized technnitian. Call Robomow Hotline.
http://robomow.eu/ Contact us page