Drive over current (66)(72)

This article is intended for Robomow professional dealers.

For RS / MS / RC / MC models

Drive motors have been working under a severe load during automatic or manual operation.
Possible reasons for such error may be:

Problem Cause	Corrective Action
High grass	Raise Mowing height CAUTION – Switch off the Safety/System Switch !
Lawn conditions	Check the lawn for no obsicles, or holes in the ground that eliminate the drive wheels to rotate freely.
Drive wheels clean from mud	Clean Drive wheels from mud
Internal malfinction	A further investigation required by an authorized technnitian. Call Robomow Hotline. http://robomow.eu/ Contact us page